Thông tin sản phẩm
Model: BỘ ĐIỀU KHIỂN NHIỆT ĐỘ PID AUTONICS TZN4M-14R
Bình chọn của bạn:
Thông tin chi tiết bộ điều khiển nhiệt độ TZN4M-14R
- Chức năng tự điều chỉnh PID kép:
Tốc độ đáp ứng cao của điều khiển PID để đạt đến giá trị mong muốn nhanh nhất, TZN4M-14R có tốc độ đáp ứng thấp của điều khiển PID để giảm thiểu sự tuột dốc cho dù đáp ứng hơi chậm.
- Độ chính xác hiển thị cao: ±0.3% (bởi giá trị F.S của mỗi ngõ vào)
- TZN4M-14R có 2 chế độ điều khiển tự động
- Có nhiều loại ngõ vào (Chức năng lựa chọn 13 loại ngõ vào): Chức năng lựa chọn: Cảm biến nhiệt độ, Điện áp và Dòng
- Điều khiển nhiệt độ TZN4M-14R có nhiều ngõ ra phụ: Bao gồm LBA, SBA, 7 loại ngõ ra Alarm và 4 loại chức năng Alarm tùy chọn, ngõ ra PV transmission (4-20mADC), Ngõ ra truyền thông RS485.
- Hiển thị dấu thập phân cho ngõ vào Analog
Specification Table TZN4M-14R
Series | TZ4SP | TZN4S | TZ4ST | TZ4M | TZN4M | TZ4W TZN4W | TZ4H TZN4H |
TZ4L | TZN4L | |
Power supply | AC Power | 100-240VAC 50/60Hz | ||||||||
AC/DC Power※1 | 24VAC 50/60HZ / 24-48VDC | |||||||||
Allowable voltagerange | 90 to 110% of rated voltage | |||||||||
Power consumption | Max. 5VA | Max. 6VA | ||||||||
AC: Approx. 8VA, DC: Max. 7W |
- | AC: Approx. 8VA, DC: Max. 7W |
- | AC: Approx. 8VA, DC: Max. 7W |
- | AC: Approx. 8VA, DC: Max. 7W |
- | |||
Display method | 7Segment LED Display [Process value(PV) : Red, Setting value(SV) : Green] | |||||||||
Character size(WxH) | TZ4SP: 4.8×7.8mm TZN4S: PV:7.8×11.0mm SV:5.8×8.0mm |
4.8×7.8mm |
TZ4M: PV:9.8×14.2mm SV:8.0×10.0mm TZN4M: PV:8.0×13.0mm SV:5.0×9.0mm |
8.0×10.0mm | TZ4H: 3.8×7.6mm TZN4H: PV:7.8×11.0mm SV:5.8×8.0mm |
PV:9.8×14.2mm SV:8.0×10.0mm |
||||
Input type | RTD | DPt100Ω, JPt100Ω, 3wire (allowable line resistance max. 5Ω per a wire) | ||||||||
Thermocouple | K(CA), J(IC), R(PR), E(CR), T(CC), S(PR), N(NN), W(TT) (allowable line resistance max. 100Ω) | |||||||||
Analog | 1-5VDC, 0-10VDC, DC4-20mA | |||||||||
Control output | Relay | 250VAC 3A 1c | ||||||||
SSR | 12VDC ±3V 30mA Max. | |||||||||
Current | DC4-20mA(Resistive load Max. 600Ω) | |||||||||
Sub output | PV transmission | - | PV transmission : DC4-20mA Load max. 600Ω | |||||||
EVENT 1 | 250VAC 1A1a | |||||||||
EVENT2 | - | 250VAC 1A 1a | ||||||||
Communication | - | - | RS485(PV transmission, SV setting) | |||||||
Control type | ON/OFF, P, PI, PD, PIDF, PIDS control | |||||||||
Display accuracy | F.S. ±0.3% or 3℃, select the higher one | |||||||||
Setting type | Front push buttons | |||||||||
Hysteresis | 1~100℃(0.1 to 100.0℃) variable(ON/OFF control) | |||||||||
Alarm output hysteresis | Adjustable ON/OFF 1 to 100 (0.1 to 100.0)℃ of alarm output | |||||||||
Proportional band(P) | 0.0 to 100.0% | |||||||||
Intergral time(l) | 0 to 3600 sec. | |||||||||
Derivative time(D) | 0 to 3600 sec. | |||||||||
Control time(T) | 1 to 120 sec. | |||||||||
Sampling period | 0.5 sec. | |||||||||
LBA setting | 1 to 999 sec. | |||||||||
RAMP setting | Ramp Up, Ramp Down at 1 to 99min. | |||||||||
Dielectric strength | 2,000VAC 50/60Hz for 1min. (between power source terminal and input terminal) | |||||||||
Vibration | 0.75mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours | |||||||||
Relay life cycle | Main output | Mechanical : Min. 10,000,000 operations, Electrical : Min. 100,000 operations(250VAC 3A resistive load) | ||||||||
Sub output | Mechanical : Min. 20,000,000 operations, Electrical : Min. 500,000 operations(250VAC 1A resistive load) | |||||||||
Insulation resistance | Min. 100MΩ(at 500VDC megger) | |||||||||
Noise | ±2kV the square wave noise (pulse width: 1us) by the noise simulator | |||||||||
Memory protection | Approx. 10years(When using non-volatile semiconductor memory) | |||||||||
Environment | Ambient temperature | -10 to 50℃, storage: -20 to 60℃ | ||||||||
Ambient humidity | 35 to 85%RH, storage: 35 to 85%RH | |||||||||
Approval | CE, UL, RoHS(TZN4S) | |||||||||
Unit weight | TZ4SP: Approx. 136g TZN4S: Approx. 150g |
Approx. 136g | Approx. 270g | TZ4W:Approx. 270g TZN4W:Approx. 259g |